Forums - SE34.I jumpers

Welcome, Guest. Please Login or Register

05/24/13 at 04:06:45

Forums › OLDER DECWARE GEAR SUPPORT › SE34I

‹ Previous topic | No topic ›

Pages: 1

Send Topic

Print

SE34.I jumpers (Read 1865 times)

cbutterf Verified Member Posts: 3	SE34.I jumpers 01/04/10 at 06:48:19 CAn someone please tell me how to correctly hook up the jumpers on an SE34.I for a paralleled output? Thanks! Chris
Back to top	IP Logged

Steve Deckert Administrator If the 1st watt sucks why continue? Posts: 2224	Re: SE34.I jumpers Reply #1 - 01/04/10 at 17:38:22 Just connect red to red and black to black for parallel operation. Steve
Back to top	IP Logged

cbutterf Verified Member Posts: 3	Re: SE34.I jumpers Reply #2 - 01/04/10 at 17:46:06 Forgive me for being dense - does this mean red to red on one side (L) and balck to black on the other (R)? Thanks!!
Back to top	IP Logged

ZYGI Seasoned Member HR-ONE Posts: 598	Re: SE34.I jumpers Reply #3 - 01/05/10 at 01:24:14 Chris, Welcome to the forum..... This means red to red/black to black left channel red to red/black to black right side. Then hook your speakers up as usual using one of the reds and one of the black on each of the two channels. ZYGI
Back to top	All Decware amps and sources, Turning Point Audio speakers IP Logged

cbutterf Verified Member Posts: 3	Re: SE34.I jumpers Reply #4 - 01/05/10 at 01:40:19 Thank you very much for this! Will now try and find 2nd pair of jumpers... Chris
Back to top	IP Logged

rmt Seasoned Member NIbbelin NFX Posts: 230	Re: SE34.I jumpers Reply #5 - 01/05/10 at 21:44:27 Any short length of wire will do for jumpers. Nothing special, audio jewelry need not apply.
Back to top	Select, CSP2 upgrade, Dec 685, DSRii, home built Nibbelin NFX w/DFR-8s, Klipsch RF-7, SE34.I, Zbox IP Logged

Pages: 1

Send Topic

Print

Forums › OLDER DECWARE GEAR SUPPORT › SE34I

‹ Previous topic | No topic ›

VISIT OUR BLOG:

Forums » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.