Welcome, Guest. Please Login or Register
Decware Audio Forums
12/22/14 at 03:34:33


Pages: 1
Send Topic Print
Dangerous to do a wooden case? (Read 1842 times)
Steve Deckert
Administrator
*****


If the 1st watt
sucks why continue?

Posts: 2445
Dangerous to do a wooden case?
10/18/09 at 02:19:23
 
Quote:
Steve,  

Would it be dangerous (ventilation and temperature wise) to put the zkit1 build inside a wooden box? The local machine shops are charging upwards of $300 to punch out the necessary holes for the chassis. I have found a local woodworker who is far more reasonable. Casing everything in a wooden box would result in something much cheaper. However, would it be safe?

Also, could I perhaps screw the sockets to the top of the chassis (metal or wooden), install the spacers, mount the board on the spacers and then solder the sockets on to the board? I am scared that after some tube rolling, the sockets might come loose perhaps. If this fear is unfounded please let me know.

Thanks,

Anurag.


Hi Anurag,

The wooden case shouldn't be a big problem.  Just be sure the amp is properly fused.  As far as the sockets go, just get yourself a tube pin straightener and keep all your pins straight.  No need to mount the sockets to the chassis.

Steve
Back to top
 
 
WWW   IP Logged
crappyjones123
Verified Member
**




Posts: 12
Re: Dangerous to do a wooden case?
Reply #1 - 10/18/09 at 02:29:58
 
thanks a ton for the reply steve.

i get the kit on monday and am going through the preparatory stages for a pair of monitors and needless to say, far too many questions are popping up and had i not thought of them, i would have been stuck with a pair of speakers that would be sealed forever. i figured i would start planning the casework for the amp before i put anything together just in case similar concerns pop up again.

surely i will come up with questions once i start building but i certainly am excited. it shall be my first tube amp build.

thanks,

anurag. (mostly people call me cj)
Back to top
 
 
  IP Logged
Raduschka
Seasoned Member
****




Posts: 210
Re: Dangerous to do a wooden case?
Reply #2 - 05/20/12 at 05:38:08
 

_MG_7789 par raduschkamuschka, sur Flickr
Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print