Welcome, Guest. Please Login or Register
Decware Audio Forums
09/20/17 at 03:01:38 



 
 


Pages: 1
Send Topic Print
Finished product (Read 2106 times)
robinaz
Ex Member



Finished product
09/15/09 at 22:32:35
 
..and it works!  i had the transformer covers copper plated for 40$. it sits on 18 gauge copper plate, which was $20.  the volume control is 1.79 from Home Depot, a 1/2 inch cap! some cherry and padauk wood pieces make up the base.  inside is a hammond box.   how does it sound? really good...and that is in to some 30 year old speakers.  i ordered the 8 inch drivers here and plan to make the speakers from the decware plans.....  then the CCE mod...then ..silver wire speaker cables?   we'll see...one step at a time. being new to this, i want to work progressively so i can discern any changes from an upgrade.  thx to Hasafraker for directing me to the .pdf diagram for the wiring details
Back to top
 

DSC00001.JPG
  IP Logged
Alan H
Ex Member



Re: Finished product
Reply #1 - 09/15/09 at 22:40:16
 
Very nice. I like the copper. The CCE mod is tricky after everything is mounted because you have to cut a couple of traces. You can see how I did it at http://www.jet5.com/triode.php

Back to top
 
« Last Edit: 09/15/09 at 22:42:29 by Alan_Hope »  
  IP Logged
robinaz
Ex Member



Re: Finished product
Reply #2 - 09/17/09 at 14:06:48
 
Thx, Alan.  That's an ingenious fix for the CCE mod.  I have my Dremel ready....!  If/when I do it, I'll report back.
Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print