Welcome, Guest. Please Login or Register
Decware Audio Forums
07/28/14 at 19:44:36


Pages: 1
Send Topic Print
Finished product (Read 1379 times)
robinaz
Verified Member
**




Posts: 3
Finished product
09/15/09 at 22:32:35
 
..and it works!  i had the transformer covers copper plated for 40$. it sits on 18 gauge copper plate, which was $20.  the volume control is 1.79 from Home Depot, a 1/2 inch cap! some cherry and padauk wood pieces make up the base.  inside is a hammond box.   how does it sound? really good...and that is in to some 30 year old speakers.  i ordered the 8 inch drivers here and plan to make the speakers from the decware plans.....  then the CCE mod...then ..silver wire speaker cables?   we'll see...one step at a time. being new to this, i want to work progressively so i can discern any changes from an upgrade.  thx to Hasafraker for directing me to the .pdf diagram for the wiring details
Back to top
 

DSC00001.JPG
  IP Logged
Alan H
Senior Member
***




Posts: 63
Re: Finished product
Reply #1 - 09/15/09 at 22:40:16
 
Very nice. I like the copper. The CCE mod is tricky after everything is mounted because you have to cut a couple of traces. You can see how I did it at http://www.jet5.com/triode.php

Back to top
 
« Last Edit: 09/15/09 at 22:42:29 by Alan H »  

FLAC via Ethernet-over-Mains
Squeezebox 3
Valab 6N Solid Silver Coax
GD-Audio DAC19 DSP
Decware SE84DIY (V-Caps + CCE mod)
Solid silver / teflon cables
Scotmoose Sachiko FE206En Horns
WWW   IP Logged
robinaz
Verified Member
**




Posts: 3
Re: Finished product
Reply #2 - 09/17/09 at 14:06:48
 
Thx, Alan.  That's an ingenious fix for the CCE mod.  I have my Dremel ready....!  If/when I do it, I'll report back.
Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print