Welcome, Guest. Please Login or Register
Decware Audio Forums
11/27/14 at 10:45:22


Pages: 1 2 
Send Topic Print
MG944 (Read 14579 times)
5u4
Verified Member
**




Posts: 1
MG944
04/16/09 at 16:09:31
 
New to this forum. Thinking about purchasing these as they look like nice speakers, but very little info about them. Wondering if someone who owns a pair could comment or maybe I'm better off with another Decware speaker. Currently using Klipsch KLF20's which are too forward sounding for my taste. Using DIY 2A3 Loftin-White. This amp pushes 4ohms with no sweat. Also using Phillips CD80 CD player & Luminous Passive Pre amp.
Back to top
 
« Last Edit: 04/17/09 at 14:15:57 by 5u4 »  
  IP Logged
ZYGI
Seasoned Member
****


HR-ONE

Posts: 644
Re: MG944
Reply #1 - 04/16/09 at 23:48:11
 
5u4,

  A lot of old forum posts, which had more info on the MG944's has been lost.  This is why there isn't to much on the MG's, I guess. Here is a link to a review done by Chris K which happens to have serial number 001 for the MG's   http://www.decware.com/zreview126.htm

 The MG's have plenty of neutral bass, never in your face, yet still has lots of detail.  Great imaging speaker as well. You might be able to talk to Chris if you're interested.

Hope this helps,
BobZ
Back to top
 
 

All Decware amps and sources, Turning Point Audio speakers
  IP Logged
Miles
Verified Member
**




Posts: 10
Re: MG944
Reply #2 - 04/19/09 at 01:29:00
 
5u4,

I've been an owner of MG944's for a couple of years and enjoy them. During most of this time they were interchanged with full range 8 inch Fostex  based BR speakers and the Hawthorne 15 inch SI coax OB's depending on the type of music played. Initially I drove my speakers with a single Zen SE84C with CSP preamp. The Fostex was pleasing on small scale music, the SI excelled on large scale orchestral and the MG's functioned well as a good all-round speaker.

Recently I added a second Zen bi-amped in series. At that point the MG's began to come to life and now I use them almost exclusively. BTW the MG's get plenty loud with one Zen but the additional power added a certain solidity and control. The  bi-amping came at the expense of increased hum (aprox. 2X) however it's not audible at the listening seat.

If you are going to buy them be sure to inquire about the alternate configuration from the one shown on the Decware site. It's the one I happen to own and it has a flat base rather than the scalloped bottom shown on the site. Only a few more bucks.

I've bought many products from Decware and have been pleased with all of them. You will be dealing with honest and talented professionals.

Miles
 

Back to top
 
 
  IP Logged
Rivieraranch
Seasoned Member
****




Posts: 1274
Re: MG944
Reply #3 - 05/05/09 at 02:07:19
 
I, too am on the verge of ordering a pair of these. It strikes me that they would sound their best with DECWARE gear; or the gear would sound better with them than with some non DECWARE speakers. I have seen how the CSP2 takes the TABOO to a whole other level. I believe that a like synergy would result when using DECWARE gear with DECWARE speakers.

During the last 4 years I have been through hell with speakers. When I changed over to tube gear I had SPICA TC 50's that my first tube amp had a hard time driving. I bought a pair of KLIPSCH RB-5 II that were a lot better, but a bit forward, trebley (is that a word) my guitar player friend said. Put them close to the wall and the bass would augment at the expense of imaging and presence. I tried a pair of TEKTON single driver speakers. While they were nice, I think the word "shouty" (how Steve described single drivers) is dead on.    

Then I bought a pair of Von Schweikert VR-1 monitors. These have proven very satisfactory in all respects. They sound nearly like floorstanders. The only trouble with them and the DECWARE TABOO is that I fear that the crossover is eating up an inordinate amount of power and the low sensitivity, 89db is a concern as well.

Because I intend to keep the TABOO and also aspire to own a MINI TORI, either one with a CSP2 out in front, I am very tempted to order a pair of these speakers. When I spoke to Steve recently he hinted of an impending price increase. I would like to avoid that.
Back to top
 
 

DECWARE CSP2+, TABOO MK III; SE84CKC; HR1; TRAPEZIUM DESKTOP SPEAKERS; TECHNICS SL1200MK5 turntable; Ah! Njoe Tjoeb CD player; MARANTZ 2226B, 2216B receivers; SENNHEISER HD-580 headphones
  IP Logged
Rivieraranch
Seasoned Member
****




Posts: 1274
Re: MG944
Reply #4 - 05/09/09 at 13:03:15
 
While ordering mine, I learned that they are no longer made with a scalloped front; this has been discontinued. The speaker has a plinth and a solid front, like Miles's speakers.  The picture has not been updated on the site. though.
Back to top
 
 

DECWARE CSP2+, TABOO MK III; SE84CKC; HR1; TRAPEZIUM DESKTOP SPEAKERS; TECHNICS SL1200MK5 turntable; Ah! Njoe Tjoeb CD player; MARANTZ 2226B, 2216B receivers; SENNHEISER HD-580 headphones
  IP Logged
Steve Deckert
Administrator
*****


If the 1st watt
sucks why continue?

Posts: 2441
Re: MG944
Reply #5 - 05/09/09 at 19:30:00
 
Back to top
 
 
WWW   IP Logged
Lon
Seasoned Member
****


"Love without
guts is
worthless!"
Philip K. D*ck

Posts: 7817
Re: MG944
Reply #6 - 05/09/09 at 21:26:31
 
Really pretty.

Both Steve and Bob do such excellent work!
Back to top
 
 

Decware:ERR,HR-1,ZP3,CSP2+,Torii Mk III,PS Audio PWT+DS,PowerBases,PPP,AC-12 pcs, Denon DVD-A1UDCI, Rega RP3 +TTPSU,white belt+Exact2, VooDoo Cable:Stradivarius, Ultra Linear+Evo ICs, Iso-Pods,Mapleshade:Double Heiix Plus,Samsonv2+v3 +4" platforms,Herbie's Iso-Cup
  IP Logged
ZYGI
Seasoned Member
****


HR-ONE

Posts: 644
Re: MG944
Reply #7 - 05/10/09 at 14:12:23
 
Thanks Lon,

    That pair turned out real pretty, the figure was unusual to bubinga, which is what is on that pair, done as a custom finish.

I have a pair in my room right now, they are also in bubinga but have more of a ribbon sliced vertical figure which doesn't show up as well as that pair did.  My wife went into the listening room the other day, and asked are these sold? When I told her they were she sad dam, they are beautiful. That says a lot, I swear if I stuck a pair of imperials in my room she would not even notice.

I ran out of shipping  boxes, which I'll get Monday, until then I'm enjoying the heck out of these. Cool

BobZ
Back to top
 
 

All Decware amps and sources, Turning Point Audio speakers
  IP Logged
musgofasa
Seasoned Member
****


Where is that
monkey? I want to
shoot something!

Posts: 556
Re: MG944
Reply #8 - 05/10/09 at 15:37:13
 
In reference to the post above about "synergy with all decware equipment":

I have talked to Bob many times and realized that Bob and Steve work together to this end on their designs. This takes place on both sides. I know Steve has a white paper about synergy of the entire experience. THe room, cables, cabinets, source, amp and anything else in the system need to work together to compiment each other. When I talk to Bob about the speaker design process, it almost always comes back to how the amps and speakers are voiced in a way to compliment each other. It makes sense to have a decware amp running decware speakers.

It certainly doesn't mean other amps or other speakers won't work with them, but it does mean that the components have been designed with each other in mind so it's a good bet, you will be happy with the combination.

I think I heard that pair of MG's at Bob's house once. Very impressive sounding and easy to get used to.

Take care,
Robert
Back to top
 
 

The graveyard is full of important men
musgofasa   IP Logged
will
Seasoned Member
****




Posts: 1264
Re: MG944
Reply #9 - 01/01/10 at 18:57:24
 
Hey all. I'm new here, and have been waiting for the speakers to break in to comment.

I got some MG944's about a month ago, the black pair that Steve had up for a customer who didn't take delivery. I bought them having loved the sound of the SE34I2+ and then having my enchantment with the Decware sound reenforced by Decware interconnects. So, I agreed so thoroughly with Steve's idea of good sound, and his success at arriving at it, that I figured the speakers had to be good! Really good. Especially remembering that far away look I heard in his voice when I asked him how he liked the MG944's.

I loved them from the 3rd day (the first couple they were a little hard and lean sounding though I could tell they would get good) but now that they are sort of broken in (maybe 150-175 hours) they are really starting to be super sweet. Everything is mellowing with no loss of detail. The bass is tight, deep and accurate, the mids detailed and real, and the highs - out the top, but all continue to become even more musical, more integrated. The sound stage is wide and deep with virtually no sense of speakers. Before I heard accurate and beautifully detailed, now I am hearing Sweet! These speakers are really good.

My only challenge has been that in my live room, the top could be a little edgy on some recordings. But then I am using a SE34 with 6N2P's, and Decware interconnects, which are very open and articulate. Also I have all power cords made from VHAudio kit stuff, silver goop on all connections, several of Alan Maher's harmonic infinity thingies in the audio chain, and I clean and treat all my CD's with Ultrabit Platnum and sand and blacken the edges.....so the system is very clean, deep, articulate and revealing. Put then, my room, with brick floors, plaster walls and a lot of glass ...if there is edge to hear, you will hear it.

I have strategically placed room treatments, but the room began surprisingly good in that it is Adobe and there are many wall shifts with lots of nooks, walkthroughs and alcoves...not much regular and square about it, and the ceiling is rough wood on round log beams...so many potential sound anomalies are tempered by the irregular patterns that the waves have to deal with. In the end, the sound is beautifully alive without much room rubbish.

But the edginess.....all of the drivers are softening with play, and the ribbons are getting sweet, but at this point, I like them better with the grills I made on. They take a little edge off. I am also playing with very light duty resonance damping to good effect using one white 2mm marigo dot near the outside edge of each ribbon housing. This could go away later as the speakers continue to break in, but for now, they cut whatever top edge remains, while simultaneously causing the mids to come forward ever-so-slightly. Very nice!
Back to top
 
 

Mac mini, Tranquility DAC, CSP3, TORII MkIV, Morrow SP-6, HR-1s...VHaudio DIY, Grover, MAC ICs...PSAudio P5 and Shunyata Defender, PI Audio and DIY power cables, HerbiesAudioLab isocups and tube dampers...
  IP Logged
Rivieraranch
Seasoned Member
****




Posts: 1274
Re: MG944
Reply #10 - 01/01/10 at 19:04:23
 
You got a Godfather deal on those '944's, Will. I would have bought them myself had mine not already been on order for several weeks when the listing went up.

I am using mine with the Mini Torii, which like the larger one, has a treble circuit. You may wish to check one of these out. Being able to adjust the treble might take the edge off of whatever room resonances you are dealing with.

My MG944's are just divine in my little listening room.
Back to top
 
 

DECWARE CSP2+, TABOO MK III; SE84CKC; HR1; TRAPEZIUM DESKTOP SPEAKERS; TECHNICS SL1200MK5 turntable; Ah! Njoe Tjoeb CD player; MARANTZ 2226B, 2216B receivers; SENNHEISER HD-580 headphones
  IP Logged
will
Seasoned Member
****




Posts: 1264
Re: MG944
Reply #11 - 01/01/10 at 19:54:27
 
Rivieraranch,

Yes, that was a real bargain and I am grateful for it. I am really just nitpicking about the edginess, it is so minor. You know..looking for that perfection. But the little damping I did brought them to a new level of engaging beauty very easily and we like the grilled look better in our living room anyway.

And as it turns out, I am waiting for delivery on a Tori III. Good timing for me here too with the Tori on sale. I love this gear, and the sound of the SE34 is brilliant, but I would prefer just a bit more power, especially for movies where the big sound tends to carry us away (and the DVD player is quieter).

But also with music, I often run the SE34 close to the distortion limit, especially with quieter recordings, so I will be happy to have the treble controls on the Tori and the extra power. Luxury!

I find that the MG's sound really good at lower volumes, but I love to be fully engaged by the music, and once I give them power, I love how they help me to disappear into the music. So nice!
Back to top
 
 

Mac mini, Tranquility DAC, CSP3, TORII MkIV, Morrow SP-6, HR-1s...VHaudio DIY, Grover, MAC ICs...PSAudio P5 and Shunyata Defender, PI Audio and DIY power cables, HerbiesAudioLab isocups and tube dampers...
  IP Logged
Rivieraranch
Seasoned Member
****




Posts: 1274
Re: MG944
Reply #12 - 01/02/10 at 11:57:41
 
Although I did buy my '944's when they were still priced at $849.00. Also, my Mini Torii was a prototype, No. 3, and was bought at a slight discount. Anyway all this gear is worth more than what we pay. The sound proves that.
Back to top
 
 

DECWARE CSP2+, TABOO MK III; SE84CKC; HR1; TRAPEZIUM DESKTOP SPEAKERS; TECHNICS SL1200MK5 turntable; Ah! Njoe Tjoeb CD player; MARANTZ 2226B, 2216B receivers; SENNHEISER HD-580 headphones
  IP Logged
will
Seasoned Member
****




Posts: 1264
Re: MG944
Reply #13 - 01/02/10 at 14:42:53
 
Agreed. For a sound this real, the palpable sense of the players in the room...Decware has a very audiophile friendly approach. I feel lucky to have found them.
Back to top
 
 

Mac mini, Tranquility DAC, CSP3, TORII MkIV, Morrow SP-6, HR-1s...VHaudio DIY, Grover, MAC ICs...PSAudio P5 and Shunyata Defender, PI Audio and DIY power cables, HerbiesAudioLab isocups and tube dampers...
  IP Logged
opnly_bafld
Ex Member



Re: MG944
Reply #14 - 01/02/10 at 16:31:52
 
Does anybody know what the price will be after January 15th?

Thanks,
Lin
Back to top
 
 
  IP Logged
Pages: 1 2 
Send Topic Print