Welcome, Guest. Please Login or Register
Decware Audio Forums
04/21/14 at 10:06:40


Pages: 1
Send Topic Print
HWK 10 plans (Read 1854 times)
ianr
Verified Member
**




Posts: 2
HWK 10 plans
10/27/08 at 01:56:23
 
Forgive me if I have missed this info somewhere but I downloaded plans for the HWK-15 with the intention of building a model scaled for 10's.  I have been directed to this forum re: scaling and I think I have looked over everything... but I don"t see any actual measurements or scaling info posted.

Thanks
Back to top
 
 
  IP Logged
Valiant
Senior Member
***




Posts: 89
Re: HWK 10 plans
Reply #1 - 11/03/08 at 23:23:23
 
Hi Ian,
I agree, everyone talks about scaling, but actual inches/millimeter measurements appear to be a little scarce. I had similar concerns when I was building 'my modded hwk' for 2, 12" drivers and can only say that I am totally pleased with the result. I included the overall box dimensions in my description. If there are more suitable dimensions that can eek out a bit more from those particular drivers, then I must be pretty close to correct. IOW, perfection does not exist in the audio world, and cutting a bit of MDF and inch or so either way on a large box, should not impact to greatly, sonically.
By the way guys, where is everyone these days?
Gaz
Back to top
 
 
  IP Logged
ianr
Verified Member
**




Posts: 2
Re: HWK 10 plans
Reply #2 - 11/04/08 at 01:40:34
 
I appreciate your reply.  Will proceed in an artistic manner...
Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print