Forums - New Zen'r with a question.

Welcome, Guest. Please Login or Register

05/20/13 at 15:01:41

Forums › AUDIO FORUMS › Projects and Mods for the DIY

‹ Previous topic | Next topic ›

Pages: 1

New Zen'r with a question. (Read 2219 times)

Amplidude

Verified Member

Posts: 2

New Zen'r with a question.
09/01/08 at 11:13:04

Hello people.
My name is Glenn, I live in Australia. I have just received 2 DIY kits with the intention of building a pair of monoblocks.
My question is, comparing the schematics of the DIY with the SE84c I notice that the DIY employs a Cathode resistor bypass capacitor and the SE84c did not. What is the advantage in this circuit? Should I experiment with and without or has Steve found that the bypass improves sound?
Any comments would be appreciated.

Glenn.

IP Logged

opnly_bafld Ex Member	Re: New Zen'r with a question. Reply #1 - 09/06/08 at 13:23:51 bump^ anyone?
Back to top	IP Logged

Steve Deckert Administrator If the 1st watt sucks why continue? Posts: 2224	Re: New Zen'r with a question. Reply #2 - 09/06/08 at 21:57:12 Both amps use a cathode bypass cap. You'll find it sounds a lot better with it. Steve
Back to top	IP Logged

Amplidude

Verified Member

Posts: 2

Re: New Zen'r with a question.
Reply #3 - 09/08/08 at 12:12:08

Thanks for your reply Steve.
I will admit that I have been loitering around your site and forums for many years now and the schematic I have is probably an older one.
You have been an inspiration to me and your enthusiasm for tubes is what got me started with them. Since seeing your site in about 2002 I have absorbed your every word and studied other sources until I was confident in building my first tube amp, a EL84 P-P. But I have always wanted to build your Zen and now is the time. I intend to build my own chassis, wire point to point and possibly use 5U4 rectification.
Thanks again and your new site looks great.

Glenn.

IP Logged

Pages: 1

Forums › AUDIO FORUMS › Projects and Mods for the DIY

‹ Previous topic | Next topic ›

VISIT OUR BLOG: