Welcome, Guest. Please
Login
or
Register
06/20/13 at 01:51:08
Forums
›
SUPPORT FORUMS FOR CABINET PLANS
›
Housewrecker Support Forum
‹
Previous topic
|
Next topic
›
Pages: 1
Scaling the housewrecker for a dayton 18 (Read 2339 times)
Audiogasm
Verified Member
Posts: 5
Scaling the housewrecker for a dayton 18
08/07/08 at 15:03:14
I have always ran my 18 in my living room in a vented enclosure and I thought I would try somethin new in the house with the housewrecker plan. is there another plan for 18s or how do I scale it?
Back to top
IP Logged
Azul Baronis
Senior Member
Visit
www.ambiophonics.org
for a better sound!
Posts: 68
Re: Scaling the housewrecker for a dayton 18
Reply #1 -
12/25/08 at 14:33:33
You simply multiply everything by 1.2. It sais to use 19mm MDF wood but I would recommend you 30mm. It might cost more and the Sub will weigh 300 pounds but it sounds better.
Back to top
Visit
www.ambiophonics.org
for a better sound!
IP Logged
TLB
Verified Member
Posts: 1
Re: Scaling the housewrecker for a dayton 18
Reply #2 -
05/23/09 at 20:27:53
I just downloaded the version II dated 7/07. Does the 1.2 factor still hold? Also do I use this factor to enlarge the port on top and the 2 bottom ports? Planning on using one or two Mach 5 IXL-18.2.2 speakers.
Thanks for the help.
Back to top
IP Logged
Valiant
Senior Member
Posts: 87
Re: Scaling the housewrecker for a dayton 18
Reply #3 -
05/30/09 at 11:08:45
Stop the hole saw. I'm not sure on port sizes, but there may something on the forums, worth checking. I'll have a browse myself and see what the go is.
Cheers
Back to top
IP Logged
Pages: 1
Forums
›
SUPPORT FORUMS FOR CABINET PLANS
›
Housewrecker Support Forum
‹
Previous topic
|
Next topic
›
VISIT OUR BLOG:
Forums
» Powered by
YaBB 2.2.2
!
YaBB
© 2000-2008. All Rights Reserved.