Welcome, Guest. Please Login or Register
Decware Audio Forums
07/25/14 at 17:06:19


Pages: 1
Send Topic Print
Housewrecker variations (Read 818 times)
Lee_Pip
Verified Member
**




Posts: 1
Housewrecker variations
03/04/08 at 03:13:57
 
Steve, just downloaded the Housewrecker plans.  I'd like to know how it would go modified for a somewhat central location in a large room (adjacent a double-sided fireplace that seperates living roomm from dining room/kitchen).  Could or should the 4" vents be placed on opposite sides and do they need to be in the corners?  Can there be more vents eg. 2 as shown plus another 2 opposite. Thanks in advance. Lee
Back to top
 
 
  IP Logged
Bart_West-VL.
Ex Member



Re: Housewrecker variations
Reply #1 - 03/08/08 at 11:28:34
 
I'll try to answer this for you, but I hope Steve can comment too.

You can place the ports somewhere else but it's better to keep them in a corner, I think it's part of the tuning.

If you put four ports in it, you have to make them smaller in diameter otherwise the tuning changes.
4 ports instead of two : multiply the diameter of the original port by 0,58071
But this might give some turbulence at high volume.

Or you can make the ports longer for higher SPL.
4 ports would have to be 6,1333... longer then what the plan says for two .ports (being the thickness of the wood used)

Good luck and let us know how it turned out please.

Bart
Back to top
 
« Last Edit: 03/08/08 at 11:31:20 by Bart_West-VL. »  
  IP Logged
Pages: 1
Send Topic Print