Welcome, Guest. Please Login or Register
Decware Audio Forums
04/24/14 at 17:15:33


Pages: 1
Send Topic Print
8 10" design????? (Read 1959 times)
badbyrdkoncepts
Verified Member
**




Posts: 11
8 10" design?????
01/13/08 at 04:02:02
 
ok here is my problem, im going to build this type of enclosure for a truck with a shell and a walk through (no back wall). i need to save as much side to side so what i was thinking was instead of building 4 identical boxes (all on end with horns forward horizontally) could'nt i just build one box wide enough for 4 woofers ( 8 total) so the plan would still be a 36"x36"x49.5"  this is just the same a s one box but wide enough for the 4 woofers. it would save me alot of would and about 4 inches or so on space? please help if you can. i am very experienced with enclosure building but this will be a totally new design for me.
forgive the crappy paint pic but hopefully you get the idea
Back to top
 
 
  IP Logged
brian84corvette
Verified Member
**




Posts: 26
Re: 8 10" design?????
Reply #1 - 01/13/08 at 06:02:24
 
thats a cool idea.
you would just have to make shure that every single sub is completely sealed in its own special box for the sealed side.      if you have all 4 top speakers and all 4 bottom speakers sharing the same ( sealed part ) air space they wouldnt sound so good.
but if each speaker has its own air space
it might not be so bad at all.
Back to top
 
 
  IP Logged
Hotsauce
Seasoned Member
****




Posts: 210
Re: 8 10" design?????
Reply #2 - 01/13/08 at 11:24:11
 
If each speaker is fed the same signal, what difference would it make if the airspace were summed rather than seperate as long as its the same volume?

John C.

Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print