Welcome, Guest. Please Login or Register
Decware Audio Forums
12/20/14 at 06:38:52


Pages: 1
Send Topic Print
First build, panel D? (Read 2066 times)
Jim
Verified Member
**




Posts: 4
First build, panel D?
05/30/07 at 16:58:37
 
Hey guys,  I've never done a sub before and my son and I are going to attempt a Deathbox 10.  I've bought plans, but the measurements on panel D don't add up.  The lenghth says 7 1/2 for the cut out and 3 inches on either side  and the depth or height of cut out 2 5/8 are these figures reversed?  

Thanks for any help.

Jim and Jacob
Back to top
 
 
  IP Logged
Jet-Lee
Seasoned Member
****




Posts: 154
Re: First build, panel D?
Reply #1 - 05/30/07 at 17:20:25
 
the cutout needs to be offset from center.

The edge of the cutout is 3" from one side, but not the other.
Back to top
 
« Last Edit: 05/30/07 at 17:20:50 by Jet-Lee »  
WWW e3_wizard jetleeamc   IP Logged
Jim
Verified Member
**




Posts: 4
Re: First build, panel D?
Reply #2 - 05/30/07 at 20:29:30
 
Doh!  Homer Simpson strikes again.  Thanks Jet-Lee
Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print