Welcome, Guest. Please Login or Register
Decware Audio Forums
09/22/14 at 23:20:35


Pages: 1 2 
Send Topic Print
2 db's out of one 4x8 sheet?? (Read 6269 times)
slipknot1212121
Ex Member



2 db's out of one 4x8 sheet??
04/15/06 at 17:42:41
 
i have searched and searched, its been a couple years and cant find it, it said my last log on was in 03 or somethin  but i cant seem to find it , anybody else?? i have bought the plans, and have built 4 db's so far and  a 10" and 12" wo's, and now i work at a cabinet shop so i wanna make some more, as it would prolly only take me  an hour to build and i could build 2 just as fast  in one sheet , i just cant find the thread , if anybody knows let me know, thanx
Back to top
 
 
  IP Logged
J_Rock
Ex Member



Re: 2 db's out of one 4x8 sheet??
Reply #1 - 04/15/06 at 18:31:39
 
uhm, what do you want us to tell you?

thers not a single question there except for the thread title, but your 4 db experience should give you your answer.
Back to top
 
 
  IP Logged
J_Rock
Ex Member



Re: 2 db's out of one 4x8 sheet??
Reply #2 - 04/15/06 at 18:35:28
 
but if your question is wether you can get 2 10 inch DBs out of one 4 x 8 sheet of mdf, i can, but its very tight, and I leave a few pieces out.

If you are talking DB12s, no way.
Back to top
 
 
  IP Logged
Lee in Arkansas
Ex Member



Re: 2 db's out of one 4x8 sheet??
Reply #3 - 05/26/06 at 15:04:11
 
Wow, it's actually pretty easy. I just drew it out to spec, and have about 3.5ft^2 of board left.

EDIT-that 3.5ft^2 of extra is doing some rough math. Plugging everything into a calculator, if this were a perfect world, there would be about 5.5ft^2 extra.

EDIT-None of the numbers for extra wood is counting the cutouts for speakers/ports/etc.
Back to top
 
« Last Edit: 05/26/06 at 15:09:12 by Jet-Lee »  
  IP Logged
Bob in St. Louis
Ex Member



Re: 2 db's out of one 4x8 sheet??
Reply #4 - 05/26/06 at 17:49:02
 
Jet, that post shows how anal retentive you are (that's a good thing in my book).  :D

Just one more question for that number crunchin' brain of yours; How much (in cubic inches) sawdust does that create?  :-*

Bob
Back to top
 
 
  IP Logged
Lee in Arkansas
Ex Member



Re: 2 db's out of one 4x8 sheet??
Reply #5 - 05/26/06 at 17:55:24
 
You really wanna know?

1/4" blade = ~125.7in^3(1/14ft^3) of sawdust, assuming it's repacked to it's original density. A solid block about 5x5x5 inches.

1/8" blade = ~62.86in^3(1/28ft^3) of sawdust, assuming it's repacked to it's original density. A solid block about 4x4x4.

Look at the time of post and the time of the edit. It didn't take me very long to calculate that out.
Back to top
 
« Last Edit: 05/26/06 at 18:01:13 by Jet-Lee »  
  IP Logged
Bob in St. Louis
Ex Member



Re: 2 db's out of one 4x8 sheet??
Reply #6 - 05/26/06 at 17:59:59
 
No, that's ok man. Save your noggin for something useful.  ;D

Bob
Back to top
 
 
  IP Logged
Lee in Arkansas
Ex Member



Re: 2 db's out of one 4x8 sheet??
Reply #7 - 05/26/06 at 18:01:46
 
Too late.
Back to top
 
 
  IP Logged
Bob in St. Louis
Ex Member



Re: 2 db's out of one 4x8 sheet??
Reply #8 - 05/26/06 at 18:26:19
 
You've never failed me Jet.  :)

.....assuming a 15 amp table saw, how much power in Kw was used?

..... another boring day at work?  :-/

Bob
Back to top
 
 
  IP Logged
Bob in St. Louis
Ex Member



Re: 2 db's out of one 4x8 sheet??
Reply #9 - 05/26/06 at 18:28:28
 
Hey Jet, do you think slipknots question has been answered yet?

Bob
Back to top
 
 
  IP Logged
Lee in Arkansas
Ex Member



Re: 2 db's out of one 4x8 sheet??
Reply #10 - 05/26/06 at 19:03:24
 
nah, not yet.

I'm gonna have to take a little bit for that kW question, gettin' ready to eat lunch.

I asked McD's for no pickle or onion, it's got about 5 slices of pickles and sliced and diced onions.  :o Shocked Shocked Shocked Shocked They're gettin' a pretty nasty call from me here in a couple minutes.
Back to top
 
« Last Edit: 05/26/06 at 19:03:53 by Jet-Lee »  
  IP Logged
Lee in Arkansas
Ex Member



Re: 2 db's out of one 4x8 sheet??
Reply #11 - 05/26/06 at 19:18:58
 
This is NOT meant to offend anyone on here, as it's a reference to the local population only.

EDIT-Removed anyway.

75% of the mexican population here either doesn't speak english, or doesn't act like it. I'm sick of getting my orders wrong after driving 20 minutes to get it.

I'm not racist, at all, but there are good and bad people in every nationality.

One of my two best friends is mexican.

EDIT-If someone doesn't appreciate this being up, or is offended, just say so. I have no problem removing it. EDIT-I did anyway, just 'cause.
Back to top
 
« Last Edit: 05/26/06 at 20:02:34 by Jet-Lee »  
  IP Logged
Lee in Arkansas
Ex Member



Re: 2 db's out of one 4x8 sheet??
Reply #12 - 05/26/06 at 19:31:50
 
[quote author=Bob in St. Louis  link=1145122961/0#8 date=1148664379]You've never failed me Jet.  :)

.....assuming a 15 amp table saw, how much power in Kw was used?

..... another boring day at work?  :-/

Bob
[/quote]
Well, figure about 1 hour of solid cutting (never timed myself doing non-stop cutting), you got 1.65kW using single phase (110vac @ 15a).
Back to top
 
« Last Edit: 05/26/06 at 19:32:59 by Jet-Lee »  
  IP Logged
Bob in St. Louis
Ex Member



Re: 2 db's out of one 4x8 sheet??
Reply #13 - 05/26/06 at 19:42:05
 
[quote author=Lee in Arkansas  link=1145122961/0#11 date=1148667538]This is NOT meant to offend anyone one here, as it's a reference to the local population only. [/quote]

I think I understand, however, our minorities are trained differently than yours in Arkansas

Bob
Back to top
 
« Last Edit: 05/26/06 at 19:52:49 by Bob »  
  IP Logged
Lee in Arkansas
Ex Member



Re: 2 db's out of one 4x8 sheet??
Reply #14 - 05/26/06 at 20:01:40
 
Oh, the diagram of cuts, that I drew out, is based off of 5 cuts that would bring the 4x8 sheet of MDF down to 6 pieces small enough to fit into my Escort.
Back to top
 
 
  IP Logged
Pages: 1 2 
Send Topic Print