Welcome, Guest. Please Login or Register
Decware Audio Forums
09/02/14 at 05:57:09


Pages: 1 2 
Send Topic Print
upgrading my SE84CSEX (Read 6017 times)
crazy bill the eel killer
Ex Member



upgrading my SE84CSEX
12/14/05 at 02:09:54
 
Hello again guys,

For those of you that have followed my meanderings on upgrading my Decware amp, I've decided to split the project into two phases. The second phase will be the fully decked and tricked SE EL84, with an EF86 input stage,transformer coupled, and with a super duper power supply. However, after starting to read Rozenbilt and Morgon Jones, I've got a good year of studying to do before I'm comfortable tackling that project. However, there is no way I'm not going to sling some serious solder before then. So now comes phase one.

I will upgrade my current SE84CSEX as follows.
Both grid stoppers(330 and 1K) will be 330 ohm Shinkohs, The coupling cap will be a Mundorf silver/gold, cathode bias on sv83 will be kiwame, on 6922 will be riken. the 47k plates and 330k grid leaks will be rikens. The 100k pot goes, replaced with a Riken(value tbd). All the PSU caps will be ASC oil caps. The 40 uf will be replaced as is, the two 20 ufs with a single 10 uf, and the two 3.3s with 4 uf caps. I'm figuring the sonic priorities are first the coupling cap, then the grid stoppers,then the cathode bias resistors, then the PS, then the plate resistors, then the grid leaks. So heres the question.

Clearly, it would be easier(and safer) to do everything at once. However, if it would be helpful to you guys, I would do each upgrade separately and report on what I heard from each step.

So, let me know what you all think. If noone cares, I'll do it all at once and of course report back. If there's an interest, I'll do it piece by piece and report back. Let me know your preference and also what you think the modification order should be. I would probably do the PS caps last, as that will require chassis modifications.

Thanks,                 Bill
Back to top
 
 
  IP Logged
chevelle
Ex Member



Re: upgrading my SE84CSEX
Reply #1 - 12/14/05 at 22:56:39
 
When I was building my clone (by studying my "real" Zens, schematic, etc) I often wondered about those 2 20uf coupling caps in series. Why not just use one 10uf 500V?
Back to top
 
« Last Edit: 12/14/05 at 22:58:31 by chevelle »  
  IP Logged
mullman
Ex Member



Re: upgrading my SE84CSEX
Reply #2 - 12/14/05 at 23:19:51
 
Eddie??????




Kiss
Back to top
 
 
  IP Logged
crazy bill the eel killer
Ex Member



Re: upgrading my SE84CSEX
Reply #3 - 12/15/05 at 01:24:09
 
Hello Chevelle

Eddie gave me great insight on the two 20s vrs the single 10, which is why I'll be changing to the single 10 uf cap in the PS. But I'd rather not state those reasons myself and let Eddie explain to all himself, which I hope will be forthcoming shortly. Where are you Eddie? My other posts are begging for answers. I hope you're feeling better  :D

Bill
Back to top
 
« Last Edit: 12/15/05 at 01:27:47 by Crazy Bill the Eel Killer »  
  IP Logged
chevelle
Ex Member



Re: upgrading my SE84CSEX
Reply #4 - 12/15/05 at 01:39:58
 
If he says 10uf, then it sounds like 10uf to me. Just seems like one less link in the chain.

one more thing, Bill.. don't really want to regenerate a post by wasting space but in regards to "The Eddie Question," check this out..

http://www.decware.com/cgi-bin/yabb/YaBB.cgi?board=General;action=display;num=11...
Back to top
 
« Last Edit: 12/15/05 at 01:42:51 by chevelle »  
  IP Logged
selmerdave
Ex Member



Re: upgrading my SE84CSEX
Reply #5 - 12/15/05 at 06:22:49
 
Steve mentioned a long time ago that the reason for the two 20's had to do with the slightly slower signature that was more pleasant than the speed of the single cap (unless I have that backwards).

Dave
Back to top
 
 
  IP Logged
crazy bill the eel killer
Ex Member



Re: upgrading my SE84CSEX
Reply #6 - 12/15/05 at 12:11:59
 
Hello Dave,

Nope, you've got it right. A single 10uf would yield more transient speed(or so I've been told). Your amp, your flavor.

Bill            :D
Back to top
 
 
  IP Logged
chrisby
Ex Member



Re: upgrading my SE84CSEX
Reply #7 - 12/16/05 at 22:08:12
 
If you can squeeze room under the hood ( or want to make a larger sub chassis  

http://www.geraldcurtis.com/images/ZenMod-01.jpg

you could always upgrade all the power supply 'lytics to Solen Fast Films, (that I've tried - not subtle)  or even PIO motor runs (not yet, but guess whose suggestion that was?)

Of course, as has been stated many times before, mods or tweaks this extensive really amount to a complete change in overall voicing and flavour of the amp. Good thing there's enough tolerance in the "subjective evaluation / system tailoring" process to allow for any changes to the original to still be vaild to our own ears.

there is no "one right way"

Back to top
 
« Last Edit: 12/16/05 at 22:09:22 by chrisby »  
  IP Logged
crazy bill the eel killer
Ex Member



Re: upgrading my SE84CSEX
Reply #8 - 12/17/05 at 00:48:24
 
Hello Chrisby and others,

The ASC caps I mentioned are PIO motor runs made by American Shizuki Corp. I've already got the two 40 ufs in hand, but I'm having trouble sourcing a single 10 uf and two 4 uf caps. I think you can quess whose advice I followed on these babies( they are big-WILL  NOT fit inside the regular chassis). If any of you know of a source for the smaller values, your help would be most appreciated.

FYI, Angela Instruments(most expensive), Parts Connexion, and Michael Percy carry the larger values. Parts Connexion may be able to order the 10 and 4 uf values with a minimum quantity. I'll know early next week what that minimum is. If it's not outrageous, maybe this forum can do a group buy, which I'll organize. After I get the info, I'll see if there's any interest. ( You know who's description of the sound of these babies has me salivating)

Cheers,  Bill               Cheesy
Back to top
 
 
  IP Logged
chrisby
Ex Member



Re: upgrading my SE84CSEX
Reply #9 - 12/17/05 at 02:51:24
 
oops, once again made the mistake of  scanning too quick and missed the detail re ASC caps.

Zen on "'roids" by the time you're done - will be fun to see some pictures.

Back to top
 
 
  IP Logged
brettjm
Ex Member



Re: upgrading my SE84CSEX
Reply #10 - 12/17/05 at 05:26:07
 
Try

http://www.alliedelec.com/Search/ProductDetail.asp?SKU=862-0377&SEARCH=oil+capac...

and

http://www.alliedelec.com/Search/ProductDetail.asp?SKU=862-0373&SEARCH=&ID=15288...

I believe ASC doesn't make a motor run under 15uF, so these should work well

I helped a buddy build a zen clone with motor runs in a larger chassis.



Sounds wonderful.

-Brett
Back to top
 
 
  IP Logged
chevelle
Ex Member



Re: upgrading my SE84CSEX
Reply #11 - 12/17/05 at 06:14:11
 
I feel shamed on now. Wow. Guess I need a bigger chassis for my twin mono clone. And I thought I got "hi tech" with allen head stainless socket screws. Thanks guys. You just trashed my project.
Back to top
 
« Last Edit: 12/17/05 at 07:44:33 by chevelle »  
  IP Logged
crazy bill the eel killer
Ex Member



Re: upgrading my SE84CSEX
Reply #12 - 12/17/05 at 16:27:35
 
Hello Brett,

Nice work on the clone. Looks great.
Thanks for the links. I'll have to investigate them. Get you know who's opinion on them sonically.

ASC makes their caps, the 386 series, in values from 1.0 to 60 uf

http://www.ascapacitor.com/Products/x386s.htm

I just can't find a vendor who sells the smaller values. The smallest I've been able to to find has been the 15uf. I'm wondering if the smaller values are being used by specialty maunfacturers and aren't available to general distributors. I'll keep trying.   Cry

Once again, thanks guys for all of your help.   Cheesy

Bill
Back to top
 
« Last Edit: 12/17/05 at 16:30:59 by Crazy Bill the Eel Killer »  
  IP Logged
brettjm
Ex Member



Re: upgrading my SE84CSEX
Reply #13 - 12/18/05 at 06:26:56
 
[quote author=crazy bill the eel killer  link=1134529794/0#12 date=1134836855]
Thanks for the links. I'll have to investigate them. Get you know who's opinion on them sonically.
[/quote]

???Gee, who could that be?

Well, I would want to track down the ASC's for the sake of consistancy and for their reputation. I'm anxious to hear how your project turns out. I would be interested in hearing your impressions for each and every change, but realize that it's just too time consuming.

I've re-built my amp using the same resistor combination you're planning and love the sound. I went with the V-Caps and can whole heartedly recommend them. I am curious about the Mundorfs though.

Are you planning to use cathode bypass caps on the input tube? If so Black Gate? I'm running a pair of 47uF there and really like the fuller sound they provide. I've been wondering what replacing them with a 50uF ASC oiler would sound like. Man that would be a BIG chassis though. All for a whopping 2 watts, but glorious watts none the less.

-Brett
Back to top
 
« Last Edit: 12/18/05 at 06:30:50 by BrettJManning »  
  IP Logged
crazy bill the eel killer
Ex Member



Re: upgrading my SE84CSEX
Reply #14 - 12/19/05 at 02:58:05
 
Hello Brett,

I've thought about a cathode bypass cap, but I haven't done the math yet to see whats needed for a 1hz pole. I will not put any electrolytics anywhere, but if the value figures reasonable enough to use a motor run I'll try it and see. It will eliminate the degenerative feedback that occurrs with an unbypassed cathode bias resistor, which should slightly increase the gain of the input stage and provide a little more pop, which to me is a good thing, and your listening seems to bear out.

I've thought about the V-cap, and I really think, based upon reviews and opinions of people I respect(guess who), that I would prefer it, but that 400 hour break-in scares the hell out of me. I suppose I could put a dummy load on the amp and let it go continuously for a few weeks. I may do that yet.

I've got to get a couple of things cleared up, but I probably will build a whole new amp instead of bastardizing my Zen. It's all up to what you know who has to say on a couple of burning questions. Since I've got different output iron it just makes sense.

I won't be starting until the new year, but I'll post pictures and commentary as the project progresses.

Thanks,                      Bill        :D
Back to top
 
 
  IP Logged
Pages: 1 2 
Send Topic Print