Welcome, Guest. Please Login or Register
Decware Audio Forums
10/26/14 at 00:36:07


Pages: 1
Send Topic Print
Can you run these T/S specs for me (Read 1601 times)
haydenlake
Ex Member



Can you run these T/S specs for me
12/08/05 at 01:49:47
 
Hello, I'm going to be making my second WO 36x36x14 (pannels) for a pair of 12" Kove Armaggedon Z's I just picked up.

The T/S specs I have and ran on WINisd came up at .4 for the sealed section. And that seems a bit small to me.

If anyone could run these through any program you might have I would really appreciate it. Any comments would be great too. I think the fairly low inductance, kinda high sens and decent xmax, should have this thing pounding.

Power is already taken care of at 2500wrms at 4ohm

Thanks,
*Power Handling: 800 watts RMS *VCdia: 3" *Le: 2.5 mH *Nominal impedance: 4 ohms per coil *Re: 3.0 ohms *Frequency response: 20-300 Hz. *Magnet weight: 192 oz. *Fs: 34 Hz *SPL: 90 dB 2.83V/1m *Vas: 1.2 cu. ft. *Qms: 5.33 *Qes: .39 *Qts: .36 *Xmax: 18 mm
Back to top
 
 
  IP Logged
jodynugent
Ex Member



Re: Can you run these T/S specs for me
Reply #1 - 12/22/05 at 14:45:27
 
Can you give me the EXACT model of the subs, by chance?? Can't find enough info on "12" Kove Armageddon Z's"
Back to top
 
 
  IP Logged
J_Rock
Ex Member



Re: Can you run these T/S specs for me
Reply #2 - 12/22/05 at 19:15:17
 
I got .40 cubic feet for sealed chamber in optimum 4th order BP also.

Back to top
 
 
  IP Logged
Jet-Lee
Ex Member



Re: Can you run these T/S specs for me
Reply #3 - 12/22/05 at 19:37:10
 
Same here.

Wow.
Back to top
 
 
  IP Logged
nthezone
Ex Member



Re: Can you run these T/S specs for me
Reply #4 - 12/23/05 at 18:29:31
 
I ran the measurement in unibox program and it shows a .7 ft3 and 1.3 ft3
1 is optimum and the other is for lowend
Back to top
 
 
  IP Logged
haydenlake
Ex Member



Re: Can you run these T/S specs for me
Reply #5 - 12/26/05 at 06:09:50
 
hey guys thanks,

I wound up not trusting WINISD or anything that came out to be .4 bc I just don't think that would sound very good and I've been fooled by WINISD before (it recommended .5 cuft for a sealed SS RLP which really doesn't start sounding good until 1cube).

I wound up going with 1 cube net for the Koves in the WO check out the pics and review here

http://www.soundsolutionsaudio.com/forum/index.php?showtopic=4982
Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print