Welcome, Guest. Please Login or Register
Decware Audio Forums
10/23/14 at 05:41:04


Pages: 1 2 
Send Topic Print
Monoblocking Selects (Read 4632 times)
Tish
Seasoned Member
****


I love YaBB 1G -
SP1!

Posts: 102
Re: Monoblocking Selects
Reply #15 - 02/07/07 at 19:06:40
 
RMT,   That is how I hooked mine up except that I shorted the rear inputs and use the front inputs because I dont need the volume control on the amp as I have a preamp.      Tish
Back to top
 
 
  IP Logged
Andy831
Seasoned Member
****




Posts: 106
Re: Monoblocking Selects
Reply #16 - 02/08/07 at 05:27:28
 
rmt/ Tish

Thanks for that very explicit sketch. which clearly shows how to do it. My only question is, you show the source / preamp connecting to the rear left input of both selects. Is that correct, or should one connect left the other right? or does it not matter either way?
Back to top
 
 

Nottingham Analogue Spacedeck with Spacearm with Denon DL301mk 2 Cart.
Decware ZP2
Sony CDP X-3000 ES
Decware CSP Pre amp
Two Decware SE84CS strapped in parallel
Tannoy Grf Memory Speakers
  IP Logged
Tish
Seasoned Member
****


I love YaBB 1G -
SP1!

Posts: 102
Re: Monoblocking Selects
Reply #17 - 02/08/07 at 17:55:27
 
Hi Andy831,  It does not matter which input you use, either one will do. The nice thing about monoblocking a zen is the ohms that the amps see from your speakers is cut in half, which is a good thing for zens. I don't know why this is so, I heard it from Steve.     Tish
Back to top
 
 
  IP Logged
Pages: 1 2 
Send Topic Print